Forgot to post a celebratory pic of my 2070 fitted, and me finally solving the issue that has been plaguing my rig since I upgraded it.
I haven't wired up the RGB yet, because it needs yet another adapter. The amount of different RGB that exists is troubling FFS. I also discovered that the rig wasn't stable. Like, under heavy loads it would crash. It's been sorta doing that since I initially built it, and I went through three vertical ribbons trying to eradicate the problem. After stripping down most of the wiring (which took me about a month) I finally discovered that the two ground cables that go into the 8 pin extension for the GPU were loose, and that is why it was unstable.
As you can imagine it was tons of fun. Especially with so much electronics wedged into it. I left it folding for three days, and with the WUs it had it was fine. So now it is going to be my server, given it's rammed full of PCIE hard drives and uses a metric ton of lanes.
I also forgot to post the spec of Mike Tyson.
AMD Ryzen 3950x
Asus TUF X570
16gb 4133 8 Pack ram (clocked to 3600 with 14 timings)
Lian-Li PC-O12WX Midi-Tower Case
EVGA GeForce RTX 2080 Ti KingPin Hybrid Limited Edition
ASUS ROG STRIX 750W 80 Plus Gold Modular Power Supply
Patriot Viper VPN100 M.2 2280 PCIe 256GB SSD (VPN100-256GM28H) (Windows)
Patriot Viper VPN100 M.2 2280 PCIe 1TB SSD (VPN100-1TBM28H)
Samsung 860 EVO 1 TB SATA M.2 (2280) Internal Solid State Drive (SSD
Noiseblocker NB-eLoop Fan B12-PS Black Edition - 120mm PWM (8)
CableMod PRO ModMesh Cable Extension Kit - Carbon
Phanteks Universal PWM Fan Hub - Black
BitFenix Alchemy 8pin PCI-E extension 45cm - Grey/Silver
BitFenix Alchemy Molex Extension Adaptor 45cm - Grey/Silver
BitFenix Alchemy Molex to SATA 45CM power extension - Grey/Silver
Noctua NT-H2 Thermal Paste (3.5g)
der8auer RYZEN 3000 OC AIO Mounting Frame (pre order, still waiting for that)
Creative Sound Blaster ZxR PCI-Express High Performance Sound Card - Retail
Phanteks Halos Lux 140mm RGB LED Fan Frame - Aluminium Gunmetal Grey
Phanteks Neon Digital RGB LED Strip Combo Set (400mm x 2)
Phanteks RGB Controller Hub for Digital RGB LED
The only other thing it needs are some feet. It came with rubber pads that all ripped off about ten minutes after I got the case.
So my buddy machined them from 10mm black acrylic. It should slide around on the carpet nicely now