Be Excellent To Each Other

Yeah that's no fun. That is why I have just kept it as dry as I can (since the bath episode) and just let it heal. I got ran over as a kid and skidded along the road on my naked back. We'd just been to the paddling pool up the road. I had to have the dressings changed a lot, and yeah I clearly remember it sucking donkey balls. I've not dressed these because thankfully I have been resting up letting them heal. I just give them a spray with savlon wash daily. Trying to keep them as dry as I can tbh.

I did get myself a lot deeper than it looked though. It's dry enough to touch and inspect now and in parts it's quite thick and deep. Still, at least it hasn't kept me off my feet so I have been keeping up on house work, washing (enjoyed it I have been that bored).

Well bollocks. Last night my friend and his son came over so we could set about dyeing my pedals. Sadly I had a bit of a ceiling pee, so it was not safe in there. So we went off to his house, then discovered the plastic traps were held on with nuts and bolts, but they had been thread locked. The nuts were round ffs, so we fought with them over the next couple of hours but I had to give up. So I might have ordered a pair of these..

So I scanned the brake plate into the PC and ended up with this.



Cut it out of vinyl with plotter, place on alu. Then cut, shaped and painted the edges (oh, and glued it on too)



So that can go back on the morrow or something.

Brake is fitted and working. Slight rub, as something seems out of kilter (I think the wheel is ever so slightly warped, thus so is the disc) but I am hoping that will sort of wear in. If not I will have to get a disc bender and try and make it run true.

Will pick up the pedals on Tues when I go over mum's for a couple of days, should be back out on it later in the week. Injuries are now scab free, and just a little pink

You don’t need a special tool to bend disks, just careful pressure, though if it’s brand new it shouldn’t be bent.

I don't think it started life out bent. It seems to go with the small warp in the wheel (which at centre will be worse). It's only literally 1mm or so. I just watched a vid, seems you can use a small adjustable spanner. Might have a go at that later

A bit of gentle finger pressure will do it. I’ve stopped mine catching that way.

Obv title

I have nothing to add but

I got it about 99% perfect in the end. Hand bending, but the trick was marking it with a sharpie (with a dot) so I could see the entry point and exit points (then bend in the middle using finger pressure obs ) It's not touching now, and I managed to tighten the pads a whole bunch without any rubbing either. Hurrah. Now I just have to pray I don't get a puncture, because of course it would all need to come off to change the tube.

Why would you have to take it off to replace the tube?

Because the axle goes through it.

Oh yeah, forgot to say. It turns out my Proper BMX (the one I ride for messing around on) is bent. The frame, to be precise. That would explain why after fighting with it for ages I could never get the back wheel aligned properly

I bought it during winter, and didn't even check it over properly when it arrived. Stupid me, but thankfully it was cheap and came with fresh paint on so I didn't drop a nut on all of that.

So instead I got this.



Which will become my rider for doing stupid shit on. I will swap out the blue tyres for some black ones I have (new in the box) and bought a seat for £13 to replace the blue one I have.



So a strip and rebuild will be in order some time next week.

Don't axles go though all bike wheels..?

Yes hence why you have to take off the wheel to change tubes. Problem is the brake does too, so it also has to be removed.

The brake or the brake disk?

The caliper/bracket.

Wow... unusual design

It's an add on plate/caliper holder (or adaptor in English) for bikes with no mounts. So I guess something has to give.. Hey, at least my rims will remain brake rub free now, and that which was on there came off with some isoprop and a cloth, so no harm done. Talking of which, the bike was bloody filthy ! so I gave it a good clean.

In a bad place ATM so am over mum's for three days. Behaving, and taking my pills on time all the time. Thus I have been asleep most of the day. Still, better than sitting around thinking of ways to make a noose from paracord I guess.

OK so I came home and put the pedals on the PK. Got about half a mile out, then realised the back wheel had shifted had to walk it back, sort it out, meaning dragging it up and down stairs and through fire doors etc. A real PITA. Figured it would cool me down nicely.. Nuh uh. Man it is humid. Came home sweating profusely. Legs feel like some one set them on fire. Would do I guess, first time I rode in three weeks. I figured the ride outwards was too easy, so didn't go that far. Coming back? yeah, seriously windy in your face. Not good.

Have bought some new parts for the new bike I am building. You know? the one that I was supposed to be swapping the frame on...

FFS.

How did the back wheel shift?

When I pulled the brake it moved. It's because the axle is not long enough to allow me to fit the chain tensioner on that side

I need to fettle it more. It is clear now, but not as well aligned as I would like.

Did a front end swap on my Proper with some parts I had from a donor bike.



Also doing a rim job on my 1998 Quadangle





And get this, bought a set of wheels, came with a free paint booth



Am painting that spider/ring combo yellow to go on the Quad. Got my cranks in for the new, new new bike too.

Where do you keep all your bikes dude? In the flat? In a shed?

In the flat lol. Most of them fit in the hall way, thankfully.

https://www.redbull.com/gb-en/Red-Bull- ... course-map

Off to see this on Saturday. Not sure why there are no girls though

durr girls arent tuff enuff hurt hurr

Well.

"So, we'll need the track to to cross this road, and there's loads of rocks on approach and we need..."
"Massive jump"
"...to think about the best way to ensure access is kept and...."
"Massive jump into super steep drop"
"...The way we need to a manage the land with regard to future.."
"Massive jump into super steep drop into a HUGE right handed berm"
"Are you even listening?

easy does it

New winter bike.

Looks incredibly light.

Helium tyres innit

I'm jonesing my bikes

Sodding weather. I did get a new seat for my orange bike because the white one started to look grotty and didn't take well to cleaning. White seats, bad idea. I've got a nice carbon post to put on it too that I had lying around from one of my race BMXes. Really looking forward to better climes now, as the depression is really starting to seep in. I forgot just how therapeutic flying up and down the beach path was. I did finish my Haro.



But fell off it the first time I rode it. The bloody chain snapped. Which gave me a nice swollen yellow knee for about 3 weeks, after which the weather turned and I've not been able to get out on it again. I sorted it though. It seems it's fussy about exactly where the back wheel sits in the dropouts (chain alignment) which is why the chain sodding snapped and gave me a big metal pedal to the knee.

Is it/you made out of sugar or something? Just get out if it makes you feel better.

Goodness knows, why all my pics never post right...

a) Beex is old
b) You hold your phone upside down
c) Profit!!!1

Only seems to be when i have my phone in landscape..

I guess if I could bring the bike inland a bit it would be OK. But the wind has been terrible lately, and it's been absolutely freezing. So I guess it's motivation more than anything.

Still, I know as soon as I fit the new seat and post I will want to ride it I did ride it on the disc brake once but the cable came loose so I had to come back. Have fixed that now.

I find that with running sometimes when the weather's shite. Just distract yourself and think about something else while you get ready to go out for a ride, once you're all set and ready to go out then you feel pretty stupid if you don't actually do it, so you do and then you remember why it was worth doing that and not just sitting on your arse.

My current (and last) BMX build.



2000 Standard STA made of Ox Platinum I had one back in 96, great frames.

Nearly finished it now, then it (along with nearly all of the others) goes into storage.

So in the spirit of finishing everything before the move I moved onto the single speed...



Things done.. Sorted out the disc brake. Found a way to pull the wheel straight (masking tape) so did that. Also, the carbon cranks and new BB are in, new pedals on and a new carbon seat and Nukeproof post. Whilst I loved the white seat the dirt had started sticking to it making it look like I'd rubbed my cornhole on it. No cleaning made it come off, so I swapped it out. Also gave the whole bike a good clean and dialled everything to within an inch of its life. Can't wait to get it out (probably tomorrow now, as waiting on Amazon) but yeah seriously excited. I did go out for a ride on my GT Speed 20" earlier, but I gassed after about a mile and a half. Forgot how much hard work 20s were tbh.